Step3: Slide into drive enclosure till closed and connect USB cable to the enclosure and to the laptop’s USB port.You do not need to fasten the screws at this point as we will remove the SSD again.Step 2: Align and connect SSD to the SATA port of the drive enclosure.Step 1: Separate the USB side from the drive enclosure.The drive enclosure comes with the following components:.Installation of SSD into Drive Enclosure: Errors were found and NOT fixed – Please proceed with extreme caution, it is likely that the clone process might fail, and data could be lost.“Errors were found and fixed” – You are good to start the cloning process.No Errors Found – You are good to start the cloning process.Step 5: In “Error checking” click on “Check”.Step 2: Right click on the drive you want to check (typically C drive).Please conduct the following checks before continuing with the process: It is your responsibility to select the correct size SSD. SSD drive that has at least 100%-120% more capacity than the capacity that is in use on your HDD – supplied in the bundle.Philips small tip screwdriver – supplied in the bundle.External Hard Disk Bay for 2.5” drives – supplied in the bundle. More details and links to resources will be provided as we work through the detailed steps:
0 Comments
Leave a Reply. |